Home | Project pages | PPL-A | About me | Guestbook
Chapter 9 - Main landing gear and landing brake

This chapter is the most time-consuming until now. It also involves some investments in hardware such as the landing gear bow (wich I bought earlier from an other builder) and the wheels and brakes.

I will divert slightly from the plans as I will install an electric actuator to deploy the landing-brake instead of the manual solution. This is a well-proven mod that is recommended by the builder-community.

I will also copy Wayne Hicks landing-gear fearings and landing-gear cover.

I've got a new helper btw. One of my daughters had a school-project and asked for help. I found that I could help her by letting her make the stuff in foam and glass. So we started out, marking, cutting, hot-wire-cutting and sanding. She did a good job and it's good to know that I have several helping hands :-)
Since this chapter is so large, I split the chapter up in smaller parts to make the webpage easier to navigate in.

Step 1: Landing gear bulkhead reinforcements
Step 2: Preparing the strut for installation
Step 3: Attach-tabs and installation
Step 4: Landing gear cover
Step 5: Installing axles, brakes and brakelines
Step 6: Constructing the landing brake
I also got my canopy from Todd's Canopies. Because the exchange-rate between USD and NOK is in my favour, I decided to buy the canopy already now. Cool to have the canopy in house!
Time used this chapter: 115:45 hours
Started: 2010-09-12
Ended: 2012-01-06